The centrifugal pump XA32/13 - Shanghai Shek Paul Pump Co., Ltd. Hebei branch :13 -73125-0217 Shanghai branch :15-921 655--135, www.hgbeng.com-XA32/13 XA32/16 XA32/20 XA32/26 XA40/13 XA40/16 XA40/20 XA40/26 XA50/13 XA50/16 XA50/20 XA50/26 XA50/26H XA65/13 XA65/16 XA65/20 XA65/20H XA65/26 XA80/16 XA80/16H XA80 / XA100-26H XA125/20 XA pump 20 XA80/26 XA100/16 XA100/26 for conveying water and physical and chemical properties similar to water, suitable for factories, mines, urban water supply and drainage, air conditioning, fire and agricultural irrigation purposes . Different performance (A, B, C and other letters) in the back of the pump model with the same specifications as the pump by changing the impeller diameter. XA pump is simple structure, reliable performance, small size, light weight, Hangzhou cavitation performance, power consumption s} easy maintenance. XA pump wide versatility, the whole series of 50 kinds of specifications, but only with a four-axis the same specifications of the shaft, bearings, bushings, shaft seal, impeller fasteners can be interchanged, the full range of pump suspension only five. The pump speed divided into 2900r/mini and 1450r/min or 1480r/min two of. R impeller diameter has been reduced properties are as follows: Maximum flow: 132L / s - 300L / s maximum total lift: 100m-5mm maximum speed: 3500r/min (for 60 cycle power) maximum operating temperature: 105 degrees Celsius shaft seal : packing seal or mechanical seal Minimum Operating Temperature: 10 ° C Working pressure: generally 1Mpa, For to 1.6MPa, please when ordering overcast. Product standards: OIN24255 BSEN733 Note: 1, before use to check whether the coupling on the same axis; 2, non-machine dry run, so as not to damage the seal, the pump tubing should have their own bracket does not allow piping weight of pressure on the pump, to avoid the crush the pump suction pipe to each pump to be installed separately, and as short as possible, bend less pump with different materials manufacturing. Pressure, working pressure must adapt to the Order of the pump 6, the transport of non-water medium category, please provide the nature of the medium in consultation with the supplier to determine whether the selected pump is applicable, including pump and shaft seal material; 7, During the warranty period, in case the machine fails, the user shall notify the supplier